The Veterinary Warming Blanket utilizes air convection to transmit heat generated by the main unit through a pipeline, ensuring even heat distribution for effective preservation or heating. This system is designed for the prevention and treatment of hypothermia in small animals, accelerating recovery and reducing hospitalization time.
Model-specific documentation
Check the covered model, language and document status before use. The manual supplied with the actual unit remains the controlling reference.
Product datasheet · English
HQS datasheet for the 210V: product overview, features and the technical specifications published for this model. Confirm the ordered configuration in your quotation.
PARAMETER | SPECIFICATION |
|---|---|
Temperature Setting | 32.0 ～ 41.0° C 、 95.0 ～ 105.8° F |
Temperature Increment | 0.1° C, 0.1° F |
Temperature Deviation | <± 1° C, <± 1.8° F |
Optional Unit | ° C & ° F |
Warming Up Time | <4 minutes |
Working Mode | Continuous working |
Operation Time | Real time display |
Alarm | Overheat, low temperature, no operation, fan error, temperature sensor error |
Power Consumption | 850VA |
Power Supply | AC220V, 50Hz/60Hz |
Operation Environment | Temp: +10° C ～ +40° C;
Humidity: 30% ～ 75%; Atmospheric pressure: non - condensation, 70KPa ～ 106Kpa |
Storage Environment | Temperature: - 20° C ～ +55° C;
Humidity: 10 ～ 93%; Atmospheric pressure: non - condensation, 50KPa ～ 106Kpa |
Degree of Protection against Ingress of Liquid | IPX2 |
Dimension | 260mm X 325mm X 325mm |
Weight | <6Kg |
Buyer decision support
The 210V is the HQS forced-air warming system for small animals: the main unit heats air and blows it through a hose into a blanket so heat spreads evenly over the patient, for keeping animals warm or rewarming them during anaesthesia and recovery. Temperature is set from 32.0 to 41.0 °C (95.0–105.8 °F) in 0.1° steps with a deviation of less than ±1 °C, and the unit warms up in under 4 minutes. It has eight fan speeds, a natural-wind (unheated) setting, four quick temperature presets, a real-time operating time display and a log of more than 10,000 records. Alarms cover overheat, low temperature, no operation, fan error and temperature sensor error, with 8 volume levels and a 2-minute mute. Over-temperature protection is dual hardware and software, with a forced hardware power-off at 50 ± 5 °C. Air is filtered through a G4 (EN 779) grade filter with plasma air purification. Sixteen kinds of disposable blankets are optional, and the reusable blanket measures 120 × 60 cm. The unit runs on AC 220 V, 50/60 Hz, draws 850 VA, is rated IPX2, measures 260 × 325 × 325 mm and weighs under 6 kg.
| Decision factor | Published for this model | Confirm before order |
|---|---|---|
| Temperature control | Setting 32.0–41.0 °C / 95.0–105.8 °F; 0.1° increment; deviation <±1 °C (<±1.8 °F); °C or °F; warm-up <4 min; 4 quick temperature presets | Ask for the recommended settings in the operation manual for anaesthesia and recovery. |
| Airflow | 8 adjustable fan speeds; natural-wind function; G4 (EN 779) grade filter; plasma air purification | Ask for the filter replacement interval and spare filters. |
| Alarms and safety | Overheat, low temperature, no operation, fan error and temperature sensor error alarms; 8 volume levels; 2-minute mute; dual hardware and software over-temperature protection with forced power-off at 50 ± 5 °C | Confirm the alarm language: the display offers Chinese and English. |
| Blankets | Reusable blanket 120 × 60 cm; 16 kinds of disposable blankets optional | Tell us your patient sizes, so we can quote the right blankets. |
| Power and size | AC 220 V, 50/60 Hz; 850 VA; IPX2; 260 × 325 × 325 mm; <6 kg; operation 10–40 °C, humidity 30–75% | Confirm your mains voltage before ordering. |
Prepared by HQS Medical Product Team · Documentation reviewed:
Source: 210V Warming System model brochure. Verify the final configuration, documents and destination-market requirements in the quotation and supplied manual.
How HQS handles warranty, spare parts and repairs for this model.
