The MD - 5001 Mini Drill is a versatile electric surgical drill and saw designed for orthopedic operations. It offers the advantage of being autoclavable up to 135°C and 1.6Mpa, significantly reducing sterilization time to just 20 minutes. This device is lightweight, compact, and designed for safe and easy operation, featuring a wire-free design for enhanced portability.
Model-specific documentation
Check the covered model, language and document status before use. The manual supplied with the actual unit remains the controlling reference.
Product datasheet · English
HQS datasheet for the MD-5001: product overview, features and the technical specifications published for this model. Confirm the ordered configuration in your quotation.
Item | Content | Specifications |
|---|---|---|
Hand Piece Working voltage | 7.2 V | - |
Output power | ≥ 50W | - |
Unit rise in tempera t ure | ≤20°C | - |
Charger Input voltage | AC220V,50Hz | - |
Output power | 7.2 V | - |
Input power | 30VA | - |
Battery voltage | 7.2 V | - |
Charging time | About 3 hours | - |
Drill Non - load speed | 0 - 1100rpm | - |
Non - load noise | ≤ 40 dB | - |
Diamet er run - out | ≤ 0.05mm | - |
Output power | 50W | - |
Buyer decision support
The MD-5001 is the non-cannulated mini drill in the HQS battery-powered orthopaedic drill and saw range. The handpiece works at 7.2 V with an output power of at least 50 W, a no-load speed of 0–1100 rpm, no-load noise of 40 dB or less, diameter run-out of 0.05 mm or less and a unit temperature rise of 20 °C or less. Batteries are 7.2 V and take about 3 hours to charge; the charger runs on AC 220 V, 50 Hz at 30 VA. The handpiece skin is sealed and the unit can be autoclaved at up to 135 °C and 1.6 MPa, with a listed sterilisation time of 20 minutes. The standard configuration is one drill unit, one charger, two rechargeable batteries, two aseptic battery transfer rings, a chuck key, an instruction manual and an aluminium alloy case. The MD-5002 has the same electrical figures but is cannulated, so it can be used over guide wires. Choose the MD-5001 for small-bone drilling where no guide wire is used; choose the MD-5002 if you place cannulated screws or pins over a wire.
| Decision factor | Published for this model | Confirm before order |
|---|---|---|
| Handpiece performance | Working voltage 7.2 V; output power ≥50 W; no-load speed 0–1100 rpm; no-load noise ≤40 dB; diameter run-out ≤0.05 mm; unit temperature rise ≤20 °C. MD-5002: same figures, cannulated | Tell us the largest drill bit or pin diameter you use so we can confirm the chuck capacity. |
| Battery and charger | Battery 7.2 V; charging time about 3 hours; charger input AC 220 V, 50 Hz, 30 VA; charger output 7.2 V | If your mains is 110 V, ask for a matching charger, and ask the price of spare batteries. |
| Sterilisation | Sealed handpiece skin; autoclavable up to 135 °C and 1.6 MPa; listed sterilisation time 20 minutes. The charger is not a medical electrical device and is not sterilised | Ask whether the batteries are sterilised or inserted through the aseptic transfer ring, and whether a sterilisation case is included or optional. |
| Standard configuration | One drill unit, one charger, two rechargeable batteries, two aseptic battery transfer rings, one drill chuck key, one instruction manual, one aluminium alloy case | List any extra attachments, bits or a sterilisation case you want quoted separately. |
Prepared by HQS Medical Product Team · Documentation reviewed:
Source: specifications currently published for this model. Verify the final configuration, documents and destination-market requirements in the quotation and supplied manual.
How HQS handles warranty, spare parts and repairs for this model.
