Anaesthesia Machine Multiparameter Monitor Defibrillator Syringe Pump Infusion Pump ECG Machine EtCO2 Monitor Vet ICU Incubator Hyperbaric Oxygen Chamber Oxygen Concentrator Fluid Warmer Nebulizer Veterinary Mask Water Purifier

Operating Table Dissecting Table LED Operating Lamp Halogen Operating Lamp Surgical Pendant Electrosurgical Unit Ultrasonic Scalpel Suction Unit Bone Drill & Saw Operating Microscope Laser Surgery Air-cushion Warmer Pet Stone Crusher

Animal Diagnostic Laboratory

Automatic Integrated Gene Detection System Hematology Analyzer Elisa Reader Chemistry Analyzer Blood Gas Electrolyte Analyzer Urine Analyzer Blood Gas&Immunoflurescence Analyzer Biological Safety Cabinet Biological Microscope Centrifuge Refrigerator Laboratory Incubator

Sterilizer (Autoclave)

Dry heat (Hot air) Type Cassette Type UV Sterilizer Ethylene Oxide Gas Portable Type Table Type Vertical Type Pulse Vacuum Table Type Horizontal Cylindrical Type Pulse Vacuum Horizontal Type H2O2 Low-Temp Plasma

Medical Imaging

DR X-ray System C-arm X-ray System Radiography X-ray System Color Doppler Ultrasound Scanner Ultrasound Scanner X-ray Film Processor X-ray Film Illuminator Rigid Endoscopy System Flexible Endoscopy System

Clinical Examination

Stainless Steel Cage ENT Examination Ophthalmology Animal Thermometer Pet Scale Head Light Stethoscope Backfat Scanner Examination Table Examination Lamp Vascular Doppler Wood's Lamp Doppler Blood Pressure Pet Treadmill Pulse Oximeter

Dental Equipment

Curing Light Dental Handpiece Dental Unit Dental Table Dental X-ray Dental Film Processor Ultrasonic Scaler

Pet Grooming

Pet Dryer Beauty Table Tub/Bath Grooming Clipper Pet Grooming vacuum

Bone Drill & Saw

Electric Sternum Saw SS-3032

Model: SS-3032

Introduction — Electric Sternum Saw

SS-3032 is a 14.4 V cordless electric sternum saw supplied as a battery-powered surgical instrument set. It delivers a handpiece output of at least 20 W and a saw frequency of up to 15,000 oscillations per minute, and is supplied with two batteries, a charger, aseptic transfer rings and saw blades.

Key Features — SS-3032

Cordless 14.4 V handpiece with sealed outer housing.
Handpiece output of at least 20 W.
Variable saw frequency from 0 to 15,000 oscillations per minute.
Operating noise of no more than 75 dB.
Two batteries and two aseptic battery-transfer rings included in the standard configuration.
Reciprocating/sternal saw blades included.
Aluminum carrying case included.

Get the price list by email

Model-specific documentation

Documents for SS-3032

Check the covered model, language and document status before use. The manual supplied with the actual unit remains the controlling reference.

Product datasheet · English

SS-3032 Electric Sternum Saw product datasheet

Public PDF

HQS datasheet for the SS-3032: product overview, features and the technical specifications published for this model. Confirm the ordered configuration in your quotation.

Product overview
Features
Technical specifications

Covered model: SS-3032
Length: 2 pages
File: PDF · 319 KB
Web copy prepared: 2026-09-25

View datasheet Download PDF

Need a different language or configuration-specific document?

Documentation center Request checklist Comparison worksheet

Electric Sternum Saw Specifications

Parameter	Specification
Handpiece working voltage	14.4 V
Handpiece output	≥20 W
Handpiece temperature rise	≤20 °C
Charger input	AC 220 V, 50 Hz; 30 VA
Charger output	14.4 V, 900 mA
Battery voltage	14.4 V
Charging time	About 3 hours
Saw frequency	0–15,000 oscillations/min
Noise	≤75 dB
Saw output power	95 W

Compare models in this series

Differences below are taken from the specifications published for each model. Confirm the final configuration in your quotation.

The published specifications do not list differing values for these models. Ask us for the model-specific datasheet.

SS-3031
SS-3032

Configuration

1 × SS-3032 saw unit and 1 × charger.
2 × 14.4 V batteries and 2 × aseptic battery-transfer rings.
2 × reciprocating or sternal saw blades.
1 × instruction manual and 1 × aluminum case.

Options & accessories

Additional sternum saw blades, batteries and transfer rings.
Sterilization case (optional).

Buyer decision support

SS-3032 procurement decision notes

Confirm the complete powered-instrument set, validated reprocessing cycle, battery support and saw/blade compatibility before treating the brochure configuration as order-ready.

Decision factor	Published for this model	Confirm before order
Handpiece	14.4 V working voltage and ≥20 W handpiece output	Request the current handpiece model, speed-control method, blade interface and preventive-maintenance schedule.
Saw motion	0–15,000 oscillations/minute and ≤75 dB noise	Confirm the test conditions and available blade types for the intended procedure.
Reprocessing	Autoclavable up to 135 °C and 1.6 MPa, 20-minute cycle	Obtain the model-specific reprocessing instructions identifying which components can be sterilized and the validated cycle.
Battery system	Two 14.4 V batteries, charger and two aseptic transfer rings	Confirm runtime, charge life, replacement availability and safe transfer workflow.
Saw output power	95 W	Confirm the blade types supplied for the intended procedure.

Procurement tools:Procurement checklist Documentation checklist Comparison worksheet

Prepared by HQS Medical Product Team · Documentation reviewed: 2026-09-03

Source: SS-3032 Sternum Saw model brochure (2 pages). Verify the final configuration, documents and destination-market requirements in the quotation and supplied manual.

Warranty and after-sales service for SS-3032

How HQS handles warranty, spare parts and repairs for this model.

Warranty period: The main-unit warranty varies by model and order. The period that applies is stated in your quotation and order confirmation; please confirm it before purchase.
What is covered: A malfunction caused by a manufacturing or quality defect within the warranty period is repaired free of charge. Consumables and accessories, damage from misuse, and units with an altered or removed serial label are not covered by the main-unit warranty.
Spare parts: Spare parts and technical support are available for at least eight years from the date HQS ships the product.
Response time: Service requests get a first reply within one business day. Please send the serial number, model, main-unit version and a description of the problem.
Repairs in warranty: If a confirmed warranty fault needs a replacement part, HQS ships the part at its own expense, and the faulty part is returned to HQS.
Repairs after warranty: HQS sends a cost-based quotation and proforma invoice first. Repaired parts are tested before they are returned. Technical help by email or phone is free.

Full warranty and service terms →