Oxygen Concentrator OC-5 - Oxygen Concentrator | HQS Medical
Oxygen Concentrator

Oxygen Concentrator OC-5

Model: OC-5

Introduction — Oxygen Concentrator

The OC-5 Oxygen Concentrator is designed for continuous, high-purity oxygen delivery. It supports 24-hour operation and offers adjustable flow rates. Available in single and double flow configurations, with options for different oxygen pressures.

Key Features — OC-5

  • Double flows are available.
  • Support 24 hours working.
  • Different oxygen pressure machine for selection.
Get the price list by email

Leave your email and we'll send the quotation and datasheet for this model, usually within one working day.

Share:

Model-specific documentation

Documents for OC-5

Check the covered model, language and document status before use. The manual supplied with the actual unit remains the controlling reference.

Product datasheet · English

OC-5 Oxygen Concentrator product datasheet

Public PDF

HQS datasheet for the OC-5: product overview, features and the technical specifications published for this model. Confirm the ordered configuration in your quotation.

  • Product overview
  • Features
  • Technical specifications
Covered model
OC-5
Length
1 pages
File
PDF · 126 KB
Web copy prepared
Need a different language or configuration-specific document?

Oxygen Concentrator Specifications

PARAMETER
SPECIFICATION
Flow Rate
0 - 5LPM
Oxygen Purity
93% (+/ - 3%)
O utlet Pressure
6 - 10PSI
S ound Level
≤ 5 0 db
P ower Consumption
≤ 5 50W
L CD Display
S witch times, Operating pressure, Present Working Time, Accumulating Time, presetting Time for 10mins to 40hours
A larm
P ower failure alarm, High&Low pressure alarm
N .W./G.W.
24/ 2 6KG
S ize
435 * 435 *6 4 0mm

Compare models in this series

Differences below are taken from the specifications published for each model. Confirm the final configuration in your quotation.

ParameterOC-5This modelOC-5BWOC-5DOC-8OC-10OC-10N
Flow Rate0 - 5LPM0 - 5LPM——0 - 10LPM—
O utlet Pressure6 - 10PSI———6 - 10PSI/20PSI—
P ower Consumption≤ 550W≤ 480W——≤ 880W800W
N .W./G.W.24/ 26KG23/25 KG——27 /29 KG—
S ize435 * 435 *640mm430 *380 *690mm32 cm* 43 cm*62cm(l*w*h)43cm*32cm*62cm(l*w*h)435 * 435 *640mm—
Oxygen flow——1 - 5 LPM1 - 8 LPM—Single flow
Oxygen concentration——93%± 3%1 - 8 LPM 93%± 3%—93+/- 3%
Power supply——AC220V± 22V,50Hz;110V± 10V,60HzAC220V± 22V,50Hz;110V± 10V,60Hz—220V/50Hz 110V/60Hz
Net Weight——15.9 kg19.2 kg——
Noise——< 45 dB(A)<50dB(A)——
Output pressure———58.6± 6 kPa—50 - 70kpa

Configuration

  • Single flow

Buyer decision support

OC oxygen concentrator series (OC-5 to OC-10N) procurement decision notes

HQS lists six oxygen concentrators, all at 93% ± 3% oxygen purity, so the choice starts with flow. OC-5, OC-5D and OC-5BW deliver up to 5 L/min, OC-8 up to 8 L/min, OC-10 up to 10 L/min and OC-10N 1–10 L/min (up to 12 L/min). The OC-5 adds an LCD with working-time records and a 10 min to 40 h timer, plus power-failure and high/low pressure alarms; the OC-5D is the double-flow 5 L/min model at 15.9 kg; the OC-5BW has the lowest power at ≤ 480 W.

Decision factorPublished for this modelConfirm before order
Flow and purityOC-5, OC-5BW: 0–5 L/min; OC-5D: 1–5 L/min, double flow; OC-8: 1–8 L/min; OC-10: 0–10 L/min; OC-10N: 1–10 L/min, single flow, up to 12 L/min. All: 93% ± 3%Add up the flow for every patient connected at the same time (for example an oxygen cage and a mask) and leave headroom; state whether you need single or double flow.
Outlet pressureOC-5: 6–10 psi; OC-10: 6–10 psi or 20 psi; OC-5BW: 0.04–0.07 MPa; OC-5D: 58.6 kPa; OC-8: 58.6 ± 6 kPa; OC-10N: 50–70 kPaIf the concentrator will feed a nebulizer or an anaesthesia machine flowmeter, check the inlet pressure that equipment needs.
Power, noise and sizeOC-5: ≤ 550 W, ≤ 50 dB, 24 / 26 kg (N.W./G.W.), 435 × 435 × 640 mm; OC-5BW: ≤ 480 W, ≤ 50 dB, 23 / 25 kg, 430 × 380 × 690 mm; OC-5D: 510 VA, < 45 dB(A), 15.9 kg, 32 × 43 × 62 cm; OC-8: 510 VA, < 50 dB(A), 19.2 kg; OC-10: ≤ 880 W, 27 / 29 kg; OC-10N: 800 W, < 55 dB, 28 kgState 220 V / 50 Hz or 110 V / 60 Hz; OC-5D, OC-8 and OC-10N support both supplies.
Display and alarmsOC-5, OC-10: LCD shows switch times, operating pressure, present and accumulated working time; timer presettable from 10 min to 40 h; power-failure and high/low pressure alarms. OC-5D: power-off, pressure-cycle fault and compressor fault alarms; OCSI oxygen concentration indicator optionalAsk whether an oxygen concentration indicator can be fitted to the model you choose.
Continuous operationOC-5, OC-5D, OC-8, OC-10, OC-10N: rated for 24-hour operationAsk for the filter replacement interval and which filters and accessories are supplied.

Prepared by HQS Medical Product Team · Documentation reviewed:

Source: specifications currently published for this model. Verify the final configuration, documents and destination-market requirements in the quotation and supplied manual.

Warranty and after-sales service for OC-5

How HQS handles warranty, spare parts and repairs for this model.

Warranty period
The main-unit warranty varies by model and order. The period that applies is stated in your quotation and order confirmation; please confirm it before purchase.
What is covered
A malfunction caused by a manufacturing or quality defect within the warranty period is repaired free of charge. Consumables and accessories, damage from misuse, and units with an altered or removed serial label are not covered by the main-unit warranty.
Spare parts
Spare parts and technical support are available for at least eight years from the date HQS ships the product.
Response time
Service requests get a first reply within one business day. Please send the serial number, model, main-unit version and a description of the problem.
Repairs in warranty
If a confirmed warranty fault needs a replacement part, HQS ships the part at its own expense, and the faulty part is returned to HQS.
Repairs after warranty
HQS sends a cost-based quotation and proforma invoice first. Repaired parts are tested before they are returned. Technical help by email or phone is free.

Full warranty and service terms →