IW-2 is a veterinary fluid warmer that transfers heat to fluid or blood inside compatible infusion or transfusion tubing. It provides two tube channels, a 30–50 °C control range, visual and audible temperature alarms, and an optional external drop-sensor system.
Model-specific documentation
Check the covered model, language and document status before use. The manual supplied with the actual unit remains the controlling reference.
User manual · English
Operating reference covering installation, interface controls, alarms, accessories, maintenance, transport and electromagnetic compatibility information.
Parameter | Specification |
|---|---|
Temperature-control range | 30–50 °C / 86–122 °F |
Control accuracy | ≤ ±1 °C / 1.8 °F |
Over-temperature protection | Heater power cut-off at 56 °C ±3 °C |
Tube channels | Two installation slots |
Power supply | AC 100–240 V, 50/60 Hz |
Input power | ≤150 W |
Dimensions | 172 × 92 × 55 mm |
Weight | <1 kg |
Electrical classification | Class I; Type B applied part |
Ingress protection | IPX4 |
Operating environment | 5–30 °C; 10%–93% RH, no frost; 86–106 kPa |
Storage and transport | -20–60 °C; 10%–93% RH, no frost; 50–106 kPa |
Buyer decision support
Confirm tubing compatibility, heating performance and temperature verification for the actual infusion setup rather than relying on the set-point range alone.
| Decision factor | Published for this model | Confirm before order |
|---|---|---|
| Temperature control | 30–50 °C, accuracy ≤ ±1 °C | Confirm the current calibration procedure and the recommended two-month verification interval. |
| Safety limits | High alarm above 51 °C, low alarm below 29 °C and heater cut-off at 56 °C ±3 °C | Confirm alarm defaults, alarm testing and the response procedure in the delivered manual. |
| Tube channels | Two tube-channel installation slots | Check every infusion/transfusion set and tube material used by the clinic; the manual does not publish a diameter range. |
| Drop monitoring | Two optional drop-sensor inputs with empty-bottle and abnormal-rate alarms | Confirm sensor quantity, compatible drip chamber and simultaneous-use limits. |
| Power and mounting | AC 100–240 V, 50/60 Hz; suspension belt and integrated pole clamp | Confirm destination cord/plug, pole fit and cleaning access in the intended setup. |
Prepared by HQS Medical Product Team · Documentation reviewed:
Source: IW-2 Vet Fluid Warmer user manual V1.1.0 (20 pages). Verify the final configuration, documents and destination-market requirements in the quotation and supplied manual.
How HQS handles warranty, spare parts and repairs for this model.
