Multiparameter Monitor HM-12V

Multiparameter Monitor

Model: HM-12V

Introduction to Multiparameter Monitor

The HM - 12V is a 12.1-inch multiparameter patient monitor designed for veterinary use. It offers comprehensive monitoring capabilities with six standard parameters: ECG, RESP, NIBP, SpO2, TEMP, and PR/HR. The monitor features advanced arrhythmia analysis, real-time ST segment monitoring, and efficient resistance to interference from defibrillators and electrosurgical devices. Its user-friendly interface, large storage capacity for trend data, and networking capabilities make it a versatile tool for critical care environments.

Key Features of HM-12V

12.1-inch Six Standard parameters: ECG, RESP, NIBP, SPO2, TEMP, PR/HR
13 Type Arrhythmic Analysis, Multi_Lead ECG Waveforms Display in Phase, Real time S_T segment analysis, pacemaker detection Drug calculation and titratiotable
Efficient resistance to interference of defibrillator and electrosurgical cautery
SPO2 can testing for 0.1% Weak
Trend Coexist Display
OxyCRG DyNamic View Display
Bed to Bed view Display
Networking capacity and nurse calling system
Built - in rechargeable battery 4400mAh
Large volume of tabular and graphic trends information storage and easy to recall
Anti - ESU, anti - defibrillator
Capture dynamic waveforms

Parameter	Value
ECG Lead Mode	5 Leads (R, L, F, N, C or RA, LA, LL, RL, V)
Lead selection	I, II, III, avR, avL, avF, V Waveform: 2 ch
Lead mode	3 Leads (R, L, F or RA, LA, LL)
Lead selection	I, II, III Waveform: 1 ch
Gain	‘2.5mm/mV, ‘5.0mm/mV, ‘10mm/mV, ‘20mm/mV, auto
Heart Rate Range	15 ~ 300 bpm
Accuracy	±1% or ±1bpm, which great
Resolution	1 bpm
Sensitivity	>200 (uV P - P)
Differential Input Impedance	> 5 M Ω
CMRR - Monitor	> 105 dB
CMRR - Operation	> 105 dB
CMRR - Diagnosis	> 85 dB
Electrode offset potential	± 300mV
Leakage Current	<10uA
Baseline Recovery	< 3S after Defi.
ECG Signal Range	± 8 m V (Vp - p)
Bandwidth - Surgery	1 ~ 15 Hz
Bandwidth - Monitor	0.5 ~ 35 Hz
Bandwidth - Diagnostic	0.05 ~ 100 Hz
Calibration Signal	1 (mV p - p) Accuracy: ± 5%
ST Segment Monitoring Range	Measure and Alarm - 2.0 ~ +2.0 mV
ARR Detecting Type	ASYSTOLE, VFIB/VTAC, COUPLET, BIGEMINY, TRIGEMINY, R ON T, VT>2, PVC, TACHY, BRADY, MISSED BEATS, PNP, PNC
Alarm	Available
Review	Available
Respiration Method	Impedance between R - F (RA - LL)
Differential Input Impedance	>2.5 M Ω
Measuring Impedance Range	0.3 ~ 5.0 Ω
Base line Impedance Range	0 ~ 2.5 K Ω
Bandwidth	0.3 ~ 2.5 Hz
Resp. Measuring Range - Adult	0 ~ 120 rpm
Resp. Measuring Range - Neo/Ped	0 ~ 150 rpm
Resp. Alarm Range - High alarm range limit	8~120 rpm
Resp. Alarm Range - Low alarm range limit	6~120 rpm
Resolution	1 rpm
Accuracy	± 2 rpm
Apnea Alarm	10 ~ 40 S
NIBP Method	Oscillometric
Mode	Manual, Auto, STAT
Measuring Interval in AUTO Mode	1, 2, 3, 4, 5, 10, 15, 30, 60, 90, 120, 180, 240,480 (Min)
Measuring Period in STAT Mode	5 Min
Pulse Rate Range	40 ~ 240 bpm
Alarm Type	SYS, DIA, MEAN
Measuring and alarm range - SYS	40 ~ 280 mmHg
Measuring and alarm range - DIA	10 ~ 225 mmHg
Measuring and alarm range - MEAN	20 ~ 240 mmHg
Resolution Pressure	1mmHg
Accuracy Pressure Maximum Mean error	± 5mmHg
Accuracy Pressure Maximum Standard deviation	± 8mmHg
SpO2 Measuring Range	0 ~ 100 %
SpO2 Alarm Range	0 ~ 100 %
Resolution	1 %
Accuracy	70% ~ 100% ± 2 % ; 0% ~ 69% unspecified
Actualization interval	about 1 Sec.
Alarm Delay	10 Sec.
Pulse Rate Measuring and Alarm Range	20~250bpm
Resolution	1bpm
Accuracy	± 3bpm
Temperature Measuring and Alarm Range	0 ~ 50° C
Resolution	0.1° C
Accuracy	± 0.1° C
Actualization interval	about 1 Sec.
Average Time Constant	<10 Sec.
IBP (optional) Label	ART, PA, CVP, RAP, LAP, ICP, P1, P2
Measuring and alarm range - ART	0 ~ 300 mmHg
Measuring and alarm range - PA	- 6 ~ 120 mmHg
Measuring and alarm range - CVP/RAP/LAP/ICP	- 10 ~ 40 mmHg
Measuring and alarm range - P1/P2	- 10 ~ 300 mmHg
Press Sensor Sensitivity	5uV/V/mmHg
Impedance	300 - 3000 Ω
Resolution	1 mmHg
Accuracy	± 2% or ± 1mmHg, which great
Actualization interval	about 1 Sec.