H1200-1 Anesthesia Machine H1200-1 - Anaesthesia Machine | HQS Medical
Anaesthesia Machine

H1200-1 Anesthesia Machine

Model: H1200-1

Introduction — H1200-1 Anesthesia Machine

HQS Vetcare delivers a high-precision veterinary anesthesia equipment system suitable for animal hospitals, pet clinics, and animal laboratories. This anesthesia machine meets the needs of general anesthesia and medical research for various animals, including mice, dogs, cats, rabbits, monkeys, pigs, and sheep.

Key Features — H1200-1

  • Application 0.5 - 100kg animal
  • Ventilation mode Closed, half - closed, half - open
  • Tidal volume 10 - 2000ml
  • Vaporizer Choose one from Isoflurane, Sevoflurane, Halothane
  • Oxygen source pressure 0.25~0.65Mpa
  • Airway pressure scope -30~60CMH2O
  • Flow Control 0 - 4L/min
  • Oxygen Flush 35L/min~75L/min
  • Pop adjust scope Directs the waste anesthetic gas from the machine to a scavenging system. In the completely open position, the pop - off valve will release pressure at 2 cm H2O, while maintain a constant passive volume in the breathing bags.
  • Inspiration impedance ≦ 0.6Kpa
  • Expiration impedance ≦ 0.6Kpa
  • Absorption tank capacity 700ml
  • Monitoring Airway pressure, Gas source pressure monitoring
  • I:E As doctor need
  • BPM As doctor need
  • Optional V-60V ventilator – Pneumatically driven and electrically controlled
  • Display: LCD digital display
  • Animal Bellow : Big animal : 300 - 1500ML ; Small animal : 0 - 300ML
  • Monitoring : Tidal volume, breathing rate, I:E ratio, p eak airway pressure
  • TV: 20 - 1500ml
  • Breathing rate: 4~60bpm
  • I:E ratio: Adjustable 3:1,2:1,1.5:1,1:1,1:1.5,1:2,1:3
  • Upper airway pressure:2~6kpa
  • Lower airway pressure:0.6~2kpa
  • Build in battery : work time more than 2 hours in case of power failure
  • Alarm: Battery low, Power failure, Airway pressure high/low
  • Alarm Silence : Manuel/Auto Switch
  • PIP scope : 5 - 60 cmH2O
  • Optional V-80V ventilator – Display: 9-inch TFT touch screen
  • Drive gas: Gas type: O2 or Air
  • Inlet pressure: 280 - 600 kPa
  • Max flow : ≤ 120 L/min
  • Operating mode : VCV, PCV, SPONT, Manual, Demo
  • Waveform: Pressure, Flow - rate, Volume Loop: PV loop, PF loop, FV loop
  • Safety pressure: System pressure does not exceed 6 KPa
  • Battery type: Li - ion, work time more than 2 hours
  • Tidal volume: 20 - 1500ml; Increment: 1 ml
  • Respiratory rate: 1 ~ 100 bpm
  • Inspiratory time: 0.1 ~ 10s
  • Respiratory ratio: 9.9:1 to 1:9.9
  • Percentage of inspiratory pause: 0 to 50%
  • PEEP: OFF, 3 ~ 20 cmH2O
  • Pressure Support: 0 ~ 60 cmH2O
  • Pressure Control: 5 ~ 60 cmH2O
  • Flow trigger : 0.5 ~ 20L/min
  • Pressure Trigger Range: - 1 ~ - 20 cmH2O
  • PSV Insp Termination Level : 25%
Get the price list by email

Leave your email and we'll send the quotation and datasheet for this model, usually within one working day.

Share:

Model-specific documentation

Documents for H1200-1

Check the covered model, language and document status before use. The manual supplied with the actual unit remains the controlling reference.

Product datasheet · English

H1200-1 H1200-1 Anesthesia Machine product datasheet

Public PDF

HQS datasheet for the H1200-1: product overview, features and the technical specifications published for this model. Confirm the ordered configuration in your quotation.

  • Product overview
  • Features
  • Technical specifications
Covered model
H1200-1
Length
3 pages
File
PDF · 314 KB
Web copy prepared
Need a different language or configuration-specific document?

H1200-1 Anesthesia Machine Specifications

PARAMETER
SPECIFICATION
Application
0.5-100 kg animal
Ventilation mode
Closed, half-closed, half-open
Tidal volume
10-2000 ml
Vaporizer
Choose one from Isoflurane, Sevoflurane, Halothane
Oxygen source pressure
0.25-0.65 MPa
Airway pressure scope
-30 to 60 cmH2O
Flow control
0-4 L/min
Oxygen flush
35-75 L/min
Pop-off adjust scope
Directs waste anesthetic gas to a scavenging system; fully open, the pop-off valve releases pressure at 2 cmH2O while keeping a constant passive volume in the breathing bag
Inspiration impedance
≤0.6 kPa
Expiration impedance
≤0.6 kPa
Absorption tank capacity
700 ml
Monitoring
Airway pressure, gas source pressure
I:E and BPM
Set by the veterinarian

Configuration

  • Main unit, one anesthesia vaporizer, one set veterinary breathing circuit, breathing circuit, gas source hose, exhaust gas absorption system, corrugated connect pipeline, simulated lung.
  • Optional: V-60V or V-80V anesthesia ventilator

Options & accessories

  • Anesthesia ventilator (V - 60V, V - 80V)
  • trolley
  • non - breathing circuit
  • tracheal intubation
  • anesthesia laryngoscope
  • soda lime
  • active carbon

Buyer decision support

H1200-1 veterinary anesthesia machine procurement decision notes

The H1200-1 is the HQS veterinary anesthesia machine for animals of 0.5–100 kg, from laboratory mice to dogs, cats, rabbits, monkeys, pigs and sheep. It works in closed, semi-closed and semi-open modes with tidal volumes of 10–2000 ml, a flowmeter range of 0–4 L/min and an oxygen flush of 35–75 L/min, on an oxygen supply of 0.25–0.65 MPa. One vaporizer is included, chosen for isoflurane, sevoflurane or halothane. The pop-off valve sends waste gas to a scavenging system and, fully open, releases pressure at 2 cmH2O. Inspiratory and expiratory resistance are each ≤0.6 kPa, the absorber holds 700 ml, and airway pressure and gas source pressure are monitored. The standard package includes the main unit, the vaporizer, a veterinary breathing circuit, gas source hose, waste gas absorption system, corrugated tubing and a test lung. A ventilator is not built in: the V-60V (pneumatically driven, LCD display) or the V-80V (9-inch touch screen, VCV, PCV, SPONT and manual modes, PEEP) can be added, and the trolley is optional.

Decision factorPublished for this modelConfirm before order
Patient range and breathing systemApplication 0.5–100 kg animals; ventilation modes closed, semi-closed, semi-open; tidal volume 10–2000 ml; inspiration and expiration impedance ≤0.6 kPa; absorption tank capacity 700 mlTell us your smallest and largest patients, and ask whether a non-rebreathing circuit should be added for the smallest ones.
Gas supply and flowOxygen source pressure 0.25–0.65 MPa; flow control 0–4 L/min; oxygen flush 35–75 L/minSay whether you use cylinders, an oxygen concentrator or a pipeline, and ask which inlet connector is fitted.
VaporizerOne vaporizer, chosen from isoflurane, sevoflurane or halothaneState the agent you use and ask which filling system the vaporizer has.
Waste gas and monitoringPop-off valve directs waste anesthetic gas to a scavenging system and releases pressure at 2 cmH2O when fully open; waste gas absorption system included; airway pressure and gas source pressure monitoringAsk whether active carbon canisters or a connection to an active scavenging system is supplied.
Ventilator optionsOptional V-60V anesthesia ventilator (pneumatically driven, electrically controlled, LCD digital display, alarms for battery low, power failure and airway pressure high/low) or V-80V (9-inch TFT touch screen; drive gas O2 or air, 280–600 kPa; VCV, PCV, SPONT, manual and demo modes; tidal volume 20–1500 ml; respiratory rate 1–100 bpm; PEEP OFF, 3–20 cmH2O; Li-ion battery over 2 hours)Say whether you need mechanical ventilation, and ask for the full specification of the ventilator you choose, including its bellows sizes.
Package and optionsStandard: main unit, one vaporizer, veterinary breathing circuit, gas source hose, exhaust gas absorption system, corrugated connecting tubing, simulated lung. Optional: V-60V or V-80V ventilator, trolley, non-breathing circuit, tracheal intubation, laryngoscope, soda lime, active carbonAdd the trolley, soda lime and intubation accessories you need to the quotation.

Prepared by HQS Medical Product Team · Documentation reviewed:

Source: specifications currently published for this model. Verify the final configuration, documents and destination-market requirements in the quotation and supplied manual.

Warranty and after-sales service for H1200-1

How HQS handles warranty, spare parts and repairs for this model.

Warranty period
The main-unit warranty varies by model and order. The period that applies is stated in your quotation and order confirmation; please confirm it before purchase.
What is covered
A malfunction caused by a manufacturing or quality defect within the warranty period is repaired free of charge. Consumables and accessories, damage from misuse, and units with an altered or removed serial label are not covered by the main-unit warranty.
Spare parts
Spare parts and technical support are available for at least eight years from the date HQS ships the product.
Response time
Service requests get a first reply within one business day. Please send the serial number, model, main-unit version and a description of the problem.
Repairs in warranty
If a confirmed warranty fault needs a replacement part, HQS ships the part at its own expense, and the faulty part is returned to HQS.
Repairs after warranty
HQS sends a cost-based quotation and proforma invoice first. Repaired parts are tested before they are returned. Technical help by email or phone is free.

Full warranty and service terms →